minco technology labs inc ? 1805 rutherford lane austin tx 78754 ? tel: 512 834 2022 ? fax: 512 837 6285 mtl4n47u-mtl4n48u-mtl4n49u single channel optocoupler features: ? high reliability ? base lead provided for conventional transistor biasing ? rugged package ? stability over wide temperature ? +1000v electrical isolation applications: ? eliminate ground loops ? level shifting ? line receiver ? switching power supplies ? motor control description the mtl4n47u, mtl4n48u, mtl4n49u are very high gain optocouplers that utilizes a gaalas infrared led optically coupled to an n-p-n silicon phototransistor packaged in a hermetically sealed 6-pin leadless chip carrier. the 4n47u, 4n48u and 4n49u optocouplers can be supplied to customer specifications as well as tested and screened in accordance with mil-prf-19500 to jantx level. absolute maxi mum rati ngs input to output voltage ............................................................................................................................... ................................................................................ +1k v emit ter-bas e volt age........................................................................................................... .............................................................................................................. 7v collector-emitter voltage (value applies to emitter-base open-circuited & the input-diode equal to zero) ................................................. 40v collec t or-bas e volt age ......................................................................................................... ..........................................................................................................45v reverse input voltage ............................................................................................................................... ...................................................................................... 2v input diode continuous forward current at (or below) 65c free-air temperature (see note 1) ................................................................. 40ma peak forward input current (value applies for tw 1 s, prr < 300 pps) ................................................................................................................... 1a continuous collector current ............................................................................................................................... ..................................................................... 50ma continuous transistor power dissipation at (or below) 25 c free-air temperat ure (see not e 2)............................................................. 300mw st orage temperat ure ............................................................................................................ ................................................................................. -65c t o + 125c operat ing free-air temperat ure range ........................................................................................... ................................................................ -55 c t o + 100c lead solder temperature (10 seconds max.) ............................................................................................................................... ................................... 240c notes: 1. derate linearly to 125c free-air temperature at the rate of 0.67 mw/c above 65c. 2. derate linearly to 125c free-air temperature at the rate of 3 mw/c. recommended operati ng condi ti ons: parameter symbol min max units input current, low level i fl 090 a input current, high level i fh 210 ma supply voltage v ce 510 v operating temperature t a -55 100 c selection guide part number part description mtl4n47u.001x single channel commercial (4n47u) optocoupler (0 to +70 c operating temperature range) mtl4n47u.002x single channel commercial (4n47u) optocoupler (-40 to +85 c operating temperature range) mtl4n47u.003x single channel commercial (4n47u) optocoupler (-55 to 125 c operating temperature range) mtl4n47u.004x single channel (4n47u) optocoupler screened to jantx level (-55 to 125 c operating temperature range) mtl4n48u.001x single channel commercial (4n48u) optocoupler (0 to +70 c operating temperature range) mtl4n48u.002x single channel commercial (4n48u) optocoupler (-40 to +85 c operating temperature range) mtl4n48u.003x single channel commercial (4n48u) optocoupler (-55 to 125 c operating temperature range) mtl4n48u.004x single channel (4n48u) optocoupler screened to jantx level (-55 to 125 c operating temperature range) mtl4n49u.001x single channel commercial (4n49u) optocoupler (0 to +70 c operating temperature range) mtl4n49u.002x single channel commercial (4n49u) optocoupler (-40 to +85 c operating temperature range) mtl4n49u.003x single channel commercial (4n49u) optocoupler (-55 to 125 c operating temperature range) mtl4n49u.004x single channel (4n49u) optocoupler screened to jantx level (-55 to 125 c operating temperature range) note: x at end of part number represents lead finish. replace with a for gold and s for solder
minco technology labs inc ? 1805 rutherford lane austin tx 78754 ? tel: 512 834 2022 ? fax: 512 837 6285 m tl4n47u, mtl4n48u, mtl4n49u single channel optocoupler electri cal characteri sti cs t a = 25 c unless otherwise specified. parameter symbol mi n typ max uni ts test condi ti ons note input diode static reverse current i r 100 a v r = 2v input diode static forward voltage -55 cv f 1.0 1.7 v i f = 10ma input diode static forward voltage +25 cv f 0.8 1.5 v i f = 10ma input diode static forward voltage +100 cv f 0.7 1.3 v i f = 10ma output transi stor parameter symbol mi n typ max uni ts test condi ti ons note collector-base breakdown voltage v (br)cbo 45 v i c = 100 a, i b = 0, i f = 0 collector-emitter breakdown voltage v ( br ) ceo 40 v i c = 1ma, i b = 0, i f = 0 emitter-base breakdown voltage v (br)ebo 7vi c = 0ma, i e = 100 a, i f = 0 off-state collector current +25 c +100 c i c(off) i c(off) 100 100 na a v ce = 20v, i f = 0ma, i b = 0 v ce = 20v, i f = 0ma, i b = 0 coupled characteristics parameter symbol mi n typ max uni ts test condi ti ons note on state collector current +25 c mtl4n47u mtl4n48u mtl4n49u i c(on) 0.5 1 2.0 5 10 ma v ce = 5v, i f = 1ma on state collector current +100 c mtl4n47u mtl4n48u mtl4n49u i c(on) 0.5 1.0 2.0 ma v ce = 5v, i f = 2ma on state collector current -55 c mtl4n47u mtl4n48u mtl4n49u i c(on) 0.7 1.4 2.8 ma v ce = 5v, i f = 2ma collector-emitter saturation voltage v ce(sat ) 0.3 v i f = 2ma, i c = 2ma, i b = 0 input to output internal resistance r io 10 11 ? v in-out = 500v 1 input to output capacitance c io 2.5 5 pf f = 1mhz, v in-out = 1kv 1 r ise/fall time-phototransistor operation mtl4n47u mtl4n48u mtl4n49u t r t f 10 10 10 20 25 25 s v cc = 10v, i f = 5ma, r l = 100 ? , i b = 0 r ise/fall time-photodiode operation mtl4n47u mtl4n48u mtl4n49u t r /t f 0.85 0.85 0.85 s v cc = 10v, i f = 5ma, r l = 100 ? , i e = 0 n ote s: . these parameters are measured between all phototransistor leads shorted together and with both input diode leads shorted toge ther. this parameter must be measured using pulse techniques (t w = 100 s duty cycle < 1%). package dimensions schematic diagram .240 (6.10) .250 (6.35) .165 (4.19) .175 (4.44) pin 1 identifier 2 .028 (0.56) .022 (0.56) 1 65 4 3 .066 (1.68) .080 (2.03) .045 (1.14) .055 (1.39) .095 (2.41) .105 (2.67) . 060 (1.52) . 070 (1.78) .082 (2.08) .098 (2.49) e b k 6 c a 1 5 pl
|